Industrial Ultrasonic Level Sensor
The PRM Ultrasonic Level Sensor is a reliable and cost-effective solution for level measurement in Industrial applications. This unit is built with an all Aluminum body, ABS sensor pickup and is designed for a range of up to 4 meters. Operating Pressure 4-43 psi and temperature range of -20°F to 194°F. The ULM has an active display and transmits a reliable analog signal for PLC or controller pickup. The units have an IP67 rating and are suitable for use in Hazardous Locations with a Class 1, Division 2 rating when wired properly for the classification environment.
The Meter IS NOT intended to be used for Explosion-proof Class 1, Division 1 Hazardous locations nor should be used for flammable product storage such as gasoline or other explosive stored materials. Typical uses are for a water transfer tank in a groundwater remediation system where the classification is Class 1, Division 2 or lower or a water transfer tank. The analog output is intended to be used to interface with a PLC or other device that can use the 4-20mA signal for control purposes.
It is always recommended that this device be used for control and that an auxiliary mechanical High or Low level protection switch be used as a backup to this device should the device fail.
- Measuring Range: 4 meters (13 ft.)
- Connection: 2” threaded connection with mating sealing washer
- Accuracy: 0.1% of full span
- Blacking Distance: .2 m (8 in.)
- Display: 4 Digit LCD for distance measurement in feet and Temperature
- Calibrated for Water and Waste Water
- Temp. Range: -20°F to 194° F
- Operating Pressure: 4-43 psi
- Shell Material: Aluminum
- Sensor Material: ABS Plastic
- Power: 24VDC
- Total Beam Angle: 8°
- Programmable Scale: Yes
- User Interface: Keypad Control
- Signal Output: 4-20mA
- IP67 Protective Covering for Class 1, Div. 2 Hazardous Locations
DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
We do not guarantee, represent or warrant that your use of our service will be uninterrupted, timely, secure or error-free.
We do not warrant that the results that may be obtained from the use of the service will be accurate or reliable.
You agree that from time to time we may remove the service for indefinite periods of time or cancel the service at any time, without notice to you.
You expressly agree that your use of, or inability to use, the service is at your sole risk. The service and all products and services delivered to you through the service are (except as expressly stated by us) provided 'as is' and 'as available' for your use, without any representation, warranties or conditions of any kind, either express or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title, and non-infringement.
In no case shall Product Recovery Management, Inc. (PRM), our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including, without limitation, lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from your use of any of the service or any products procured using the service, or for any other claim related in any way to your use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service, even if advised of their possibility. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, our liability shall be limited to the maximum extent permitted by law.
SECTION 14 - INDEMNIFICATION
You agree to indemnify, defend and hold harmless Product Recovery Management, Inc. (PRM) and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licensors, service providers, subcontractors, suppliers, interns and employees from any claim or demand, including reasonable attorneys’ fees, made by any third-party due to or arising out of your breach of these Terms of Service or the documents they incorporate by reference, or your violation of any law or the rights of a third-party.