Resources
- Description
- Warranty
- Shipping & Delivery
- Exchanges
PRM #2 SIZE LIQUID FILTER BAGS - POLYESTER FELT WITH POLYPROPYLENE RINGS - 1 MICRON
PRMFiltration liquid filter bags made of polyester felt to offer you quality and efficiency in each bag. Polyester Felt bag materials offer high dirt holding capacity at a low cost.
Filter bags are designed to filter liquid media by trapping contaminants in the bag material. The bags are then replaced when they become full. Filter bags work by fitting inside of a filter bag housing. The liquid is then piped into the housing and through the bags. The filtered media comes through the bottom outlet and can continue through the piping. Filter bags come in a range of sizes, micron levels, and materials.
FEATURES:
- 7-1/16" diameter x 32" length
- # 2 Size Filter Bags
- Materials: Polyester Felt Bag, Polypropylene Ring
- 4.4 square feet of surface area
- Max. Temperature: 275 F
Industry Size:
The filtration industry uses standardized sizing so filter bags can work in any manufacturers housings of the same designated size. PRM has in inventory:
#1 size bags: 7-1/16" diameter x 16-1/2" length
#2 size bags: 7-1/16" diameter x 32" length
#4 size bags: 4-1/8" diameter x 14" length
Micron Rating:
Filter bags use micron ratings to denote the size of the holes in the bag. Depending on the bag material, PRM offers a range of micron sizes from 0.5 micron to over 700 micron. A micron is a unit of measurement to describe a millionth of a meter.
Welded vs. Sewn Seam
Most PRM bags have a welded seam to eliminate needle holes which may allow bypass. Some materials such as the nylon mesh and nomex material are sewn seam since the bag material does not allow for welding. Bags which are sewn use a 5 line system.
Available in Quantities of 10 or 25 Bags or cases of 50 bags.
A. If not satisfied with a PRM product for any reason, customers should contact PRM. Returns submitted within 30 days of the original invoice and must be in original packaging and in new condition. Please contact PRM to provide additional information regarding a return.
B. PRM Limited Warranties are applicable to PRM branded products, non-transferable, and warrant against manufacturer defects in workmanship and materials under normal use for 1 year after the date of the PRM invoice unless otherwise stated. If PRM approves the product is accepted for return during the limited warranty period, PRM may repair, replace, or refund the amount paid by the customer.
C. Non-PRM branded products retain their manufacturer's warranty. Customer should contact the manufacturer for warranty service.
D. PRM is not liable for claims arising out of product misuse, improper product selection, improper installation, and/or product modification. PRM's liability in all events is limited to the purchase price paid for the product.
The vast majority of PRM products ship directly from our facility within one business day. High value items such as blowers, pumps, and fans may have extended lead times due to global supply. Please consider contacting PRM prior to your purchase if it's necessary to know an exact delivery date and time.
IMPORTANT: All goods must be inspected immediately upon delivery. Any shipping damage, missing items, or product defects must be reported to both PRM Filtration and the shipping carrier within 24 hours of delivery. Failure to report issues within this timeframe may result in your claim being denied. Please retain all original packaging materials, as they may be required for filing a damage claim.
Product Recovery Management, Inc. Returns/Exchanges
200 20th Street
Butner, North Carolina 27509.
Do not send us a damaged or defective item for exchange prior to contacting us. We will then contact you regarding your return. We cannot accept exchanges unless we have responded to your request.
