AirSep AS-D
AirSep Alpha Series Oxygen Generators produce from 20 to 5,500 cubic feet of oxygen
per hour at up to 95% oxygen concentration. When electricity and a source of compressed air is supplied, these dependable machines can provide oxygen for practically any application.
AirSep Oxygen Concentrators:
- Produces Oxygen from compressed air
- Microprocessor controlled
- Low operating cost
- Easy to install and maintain
*An unprotected or inadequately ventilated environment or improper control power may cause damage to the oxygen concentrator and is not covered under warranty.
Specifications:
Product Characteristics:
- Product Flow: 80 - 90 SCFH (Factory set to your specific requirements)
- Standard Product Pressure: 45-55 psig
- Product Purity: Up to 95%
- Product Dew Point: -100°F (-73°C)
- Dimensions: 20 W x 16 D x 60 H Inches (Nominal)
- Weight: 361 lbs.
- Physical Connections:
Compressed Air Inlet: ¼” FNPT
Product Gas Outlet: ¼” FNPT
Ambient Operating Conditions:
- Locate the oxygen generator in a well-ventilated area that is protected from weather elements and remains between 40°F (4°C) and 112°F (44°C)
- Feed Air Requirements
Flow Rate: Refer to Chart in Datasheet
Clean and Dry "Plant Air" (Class 5.6.4 per ISO Specification 8573.1
Pressure: 90 psig (620 kPa) minimum - Temperature: 122°F (50°C) maximum
Control Power Requirements:
- 120 V ~ ±10%, 50/60 Hz, Single Phase, 1.0 A
- 220 V ~ ±10%, 50/60 Hz, Single Phase, 0.5 A
- NRTL Certifications and Approvals ASME Section VIII Division 1, CAN/CSA-C22.2 No. 61010-1-12, ANSI/UL Std. No. 61010-1:2012 (120 V configurations only)
Options and Accessories:
Does not include O2 receiver tank. Requires feed supply air see chart in cut sheet. Will need accessory kit.
*These units are not used for filling oxygen cylinders. To fill a 2,200 psi oxygen cylinder requires specialized equipment.
Warranty: 1 Year Parts and Factory Labor*
LIMITED WARRANTY FOR ALL PRM PRODUCTS.
A. If not satisfied with a PRM product for any reason, customers should contact PRM. Returns submitted within 30 days of the original invoice and must be in original packaging and in new condition. Please contact PRM to provide additional information regarding a return.
B. PRM Limited Warranties are applicable to PRM branded products, non-transferable, and warrant against manufacturer defects in workmanship and materials under normal use for 1 year after the date of the PRM invoice unless otherwise stated. If PRM approves the product is accepted for return during the limited warranty period, PRM may repair, replace, or refund the amount paid by the customer.
C. Non-PRM branded products retain their manufacturer's warranty. Customer should contact the manufacturer for warranty service.
D. PRM is not liable for claims arising out of product misuse, improper product selection, improper installation, and/or product modification. PRM's liability in all events is limited to the purchase price paid for the product.
SHIPPING & DELIVERY
Orders are normally shipped from our facility in North Carolina within 1-2 business days after the payment is made. It is very important that the correct shipping address is entered at checkout. We are not responsible for incorrect or undeliverable addresses. Shipping is automatically calculated using current published rates. Buyer pays all shipping charges. Most orders will ship via USPS, UPS, or Fedex depending on size and weight. We reserve the right to choose which carrier we ship through to offer you the lowest available rate. Due to the size and weight of certain item(s) sometimes we cannot ship using our usual methods (UPS , USPS etc.) We are very experienced with shipments of various sizes and weights, and have longstanding relationships with motor freight carriers, so generally get a very good rate. We will be happy to get a freight shipping quote for oversized/overweight items before the purchase is completed. For an accurate quote, please provide: Shipping Address with Zip Whether delivery address is commercial or residential If there is a loading/unloading dock and equipment (forklift) available onsite Every effort is made to expedite your delivery. However, once the item is shipped, delivery time is out of our control.The vast majority of PRM products ship directly from our facility within one business day. High value items such as blowers, pumps, and fans may have extended lead times due to global supply. Please consider contacting PRM prior to your purchase if it's necessary to know an exact delivery date and time.