888-873-2848
SPARTOX™ Fully Packaged Ozone Panel
SpartOx™ Ozone Treatment Systems are self contained units that produce ozone to mix with water under pressure.
SPARTOX ozone systems are easy to install,
operate and maintain. It is highly reliable as a
result of both active and passive protection
systems built into the design.
The SPARTOX M-20 system features:
- SPARTOX Ozone Generator Panel Skid, UL listed in Nema 4/12 Enclosure
- 120V Single Phase Power
- 20G/hr PTI Solid State Ozone Generator
- Fan Cooled Ventilation with bottom mounted inlet vent
- Generator is fully plumbed and includes all ancillary devices
- AirSep AS123-8 Ozone Concentration Mini Pack with integral Oxygen
- Inline Nano NF0008 .01 Micron Filter
- ATI ambient oxygen monitor.
The ozone water injection system is designed to achieve 90% plus ozone transfer efficiency.
Water flow rates will vary from application to application and applied ozone dose.
Ozone can be used for both water disinfection and oxidation to remove organic and inorganic contaminants.
Quick Start Checklist for Ozone Generator
SPARTOX™ Systems by PRMFiltration
Important information about Ozone:
OSHA guidelines for Ozone in the workplace are based on time-weighted averages. Ozone levels should never exceed the following average: 0.10 ppm (parts per million) for 8 hours per day exposure.
For more detailed information on safe ozone levels, see the bullet points below.
The OSHA website cites several ACGIH (American Conference of Governmental Industrial Hygienists) guidelines for ozone in the workplace:
0.2 ppm for no more than 2 hours exposure
0.1 ppm for 8 hours per day exposure doing light work
0.08 ppm for 8 hours per day exposure doing moderate work
0.05 ppm for 8 hours per day exposure doing heavy work
For more information, see the OSHA webpage regarding ozone: http://www.osha.gov/dts/chemical sampling/data/CH_259300.html
Unlike OSHA, NIOSH safety and health standards are not enforceable under US law. However, NIOSH does "develop recommendations for health and safety standards" that may influence future law and OSHA regulations.
The NIOSH recommended exposure limit for ozone is 0.1 ppm (0.2 mg/m3). According to NIOSH, Ozone levels of 5 ppm or higher are considered immediately dangerous to life or health.
LIMITED WARRANTY FOR ALL PRM PRODUCTS.
A. If not satisfied with a PRM product for any reason, customers should contact PRM. Returns submitted within 30 days of the original invoice and must be in original packaging and in new condition. Please contact PRM to provide additional information regarding a return.
B. PRM Limited Warranties are applicable to PRM branded products, non-transferable, and warrant against manufacturer defects in workmanship and materials under normal use for 1 year after the date of the PRM invoice unless otherwise stated. If PRM approves the product is accepted for return during the limited warranty period, PRM may repair, replace, or refund the amount paid by the customer.
C. Non-PRM branded products retain their manufacturer's warranty. Customer should contact the manufacturer for warranty service.
D. PRM is not liable for claims arising out of product misuse, improper product selection, improper installation, and/or product modification. PRM's liability in all events is limited to the purchase price paid for the product.
SHIPPING & DELIVERY
Orders are normally shipped from our facility in North Carolina within 1-2 business days after the payment is made. It is very important that the correct shipping address is entered at checkout. We are not responsible for incorrect or undeliverable addresses. Shipping is automatically calculated using current published rates. Buyer pays all shipping charges. Most orders will ship via USPS, UPS, or Fedex depending on size and weight. We reserve the right to choose which carrier we ship through to offer you the lowest available rate. Due to the size and weight of certain item(s) sometimes we cannot ship using our usual methods (UPS , USPS etc.) We are very experienced with shipments of various sizes and weights, and have longstanding relationships with motor freight carriers, so generally get a very good rate. We will be happy to get a freight shipping quote for oversized/overweight items before the purchase is completed. For an accurate quote, please provide: Shipping Address with Zip Whether delivery address is commercial or residential If there is a loading/unloading dock and equipment (forklift) available onsite Every effort is made to expedite your delivery. However, once the item is shipped, delivery time is out of our control.The vast majority of PRM products ship directly from our facility within one business day. High value items such as blowers, pumps, and fans may have extended lead times due to global supply. Please consider contacting PRM prior to your purchase if it's necessary to know an exact delivery date and time.
