{"title":"Waterra","description":"","products":[{"product_id":"waterra-fmt-45-disposable-groundwater-filter","title":"Waterra FMT-45 Medium Turbidity Disposable Groundwater Filter","description":"\u003cp\u003eWaterra FMT-45 Medium Turbidity Filter\u003c\/p\u003e\n\u003cp\u003eFMT-45\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedium turbidity\u003c\/li\u003e\n\u003cli\u003eContains 300 cm² of high quality polyethersulphone 0.45 micron filter media\u003c\/li\u003e\n\u003cli\u003eProvides the user with a more economic option for field filtration when lower turbidity is encountered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePFAS, PFOS \u0026amp; PFOA free\u003c\/li\u003e\n\u003cli\u003eMaximum media exposure\u003c\/li\u003e\n\u003cli\u003eNo filtration media lost to blinding — maximum utility gained from the media, even with the most turbid samples\u003c\/li\u003e\n\u003cli\u003eExcellent particle retention above the target micron size range\u003c\/li\u003e\n\u003cli\u003eHigh void volume of this media helps prolong media life\u003c\/li\u003e\n\u003cli\u003ePolyethylene capsule with integrated compound inlet— has both a 3\/8 inch threaded nipple and a 1\/2 inch hose barb allowing the filter to be attached easily to a variety of pumps and tubing sizes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32838745882687,"sku":"PRMBFMT45","price":13.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterra.jpg?v=1596552527"},{"product_id":"waterra-fht-45-disposable-groundwater-filter","title":"Waterra FHT-45 High Turbidity Disposable 0.45 Micron Groundwater Filters","description":"\u003cp\u003eWaterra FHT-45 High Turbidity Filter\u003c\/p\u003e\n\u003cp\u003eFHT-45\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh turbidity\u003c\/li\u003e\n\u003cli\u003eContains 600 cm² of high quality polyethersulphone 0.45 micron filter media\u003c\/li\u003e\n\u003cli\u003eOffers the user the most surface area available in capsule type filters today\u003c\/li\u003e\n\u003cli\u003ePackage of 50 Filters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePFAS, PFOS \u0026amp; PFOA free\u003c\/li\u003e\n\u003cli\u003eMaximum media exposure\u003c\/li\u003e\n\u003cli\u003eNo filtration media lost to blinding — maximum utility gained from the media, even with the most turbid samples\u003c\/li\u003e\n\u003cli\u003eExcellent particle retention above the target micron size range\u003c\/li\u003e\n\u003cli\u003eHigh void volume of this media helps prolong media life\u003c\/li\u003e\n\u003cli\u003ePolyethylene capsule with integrated compound inlet— has both a 3\/8 inch threaded nipple and a 1\/2 inch hose barb allowing the filter to be attached easily to a variety of pumps and tubing sizes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32838748209215,"sku":"PRMBFHT45","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterra_70b87753-d59d-40d4-a622-8f3456cf157a.jpg?v=1596552574"},{"product_id":"waterra-valve-wrench-for-foot-valves","title":"Waterra Valve Wrench for Foot Valves","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra Valve Wrench is a convenient tool for securing your Inertial Pump valves to the poly tubing. It’s easy to use, simply set your valve into the wrench socket and use the wrench to turn the valve into or onto the tubing. When attaching a valve with a female thread, put a mark on the tubing or place your thumb about 1 inch from the bottom of the tube and twist the valve on with the wrench until it reaches this point.  When attaching a valve with a female thread, put a mark on the tubing or place your thumb about 1 inch from the bottom of the tube and twist the valve on with the wrench until it reaches this point.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS. \u003c\/span\u003eThe Waterra Valve Wrench accommodates all Waterra Foot Valves except the SS-19.\u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32922794754111,"sku":"WTAWVW1","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/wrench.jpg?v=1598038882"},{"product_id":"waterra-d-32-foot-valve-high-flow","title":"Waterra D-32 Inertial Pump Foot Valve, High Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra D-32 Foot Valve, High Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra D-32 High Flow Inertial Pump foot valve is made of acetal thermoplastic and has a 1-1\/4 inch OD (32 mm). The D-32 is used with Waterra Standard Flow  HDPE or LDPE Tubing (1” X 0.814”). The tapered female thread self taps onto polyethylene tubing making a secure connection.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra D-32 Inertial Pump can be operated by hand with the Waterra Lever Pump but is best when operated with a powered Waterra tubing actuator such as the Hydrolift-2. The High Flow Inertial Pump System has the greatest depth capacity of the Waterra Inertial Pumps with the ability to lift water from 300’. This system is best suited for use in 2 inch monitoring wells and has a powerful well development capacity. The D-32’s development ability is further increased when used with Waterra Surge Blocks. Flow rates are a function of pumping speed and lift requirements and can be as much as 4 gallons per minute.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis Waterra Pump is used for sampling monitoring wells, including sampling for VOC’s and is also an excellent tool for monitoring well development when used with Waterra Surge Blocks and a powered actuator.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost importantly, the low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32922819952703,"sku":"WTAD32","price":24.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrad32.jpg?v=1598039419"},{"product_id":"waterra-d-13-foot-valve-low-flow","title":"Waterra D-13 Inertial Pump Foot Valve, Low Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra D-13 Foot Valve, Low Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra D-13 Low Flow Inertial Pump foot valve is made of acetal thermoplastic and has a 1\/2 inch OD (13 mm). The D-13 is used with Waterra Low Flow HDPE or LDPE Tubing (1\/2” X 3\/8”). The tapered male thread self taps into the polyethylene tubing making a semi-secure connection. If this valve is used in a deep monitoring wells (\u0026gt; 50’), a stainless screw may be driven through the poly tubing and into the plastic valve’s threading to permanently attach the valve to the tubing.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra D-13  Inertial Pump is typically operated by hand or with the Waterra Lever Pump, a powered Waterra tubing actuator such as the Hydrolift-2 is usually not necessary. This system can be used in 2 inch monitoring wells but is best suited in 1” piezometers and can provide lifts of up to 100 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1\/2 gallon per minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe D-13 Foot Valve is designed for use in narrow diameter wells or 2” monitoring wells where access is restricted. The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32922839384127,"sku":"WTAD13","price":9.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/WATERRAD13.jpg?v=1598039841"},{"product_id":"waterra-ss-32-foot-valve-high-flow","title":"Waterra SS-32 Inertial Pump Foot Valve, High Flow","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra SS-32 High Flow Inertial Pump foot valve is made of stainless steel and has a 1-1\/4 inch OD (32 mm). The SS-32 is used with Waterra Standard Flow  HDPE or LDPE Tubing (1” X 0.814”). The tapered female thread self taps onto polyethylene tubing making a secure connection.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra SS-32 Inertial Pump can be operated by hand with the Waterra Lever Pump but is best when operated with a powered Waterra tubing actuator such as the Hydrolift-2. The High Flow Inertial Pump System has the greatest depth capacity of the Waterra Inertial Pumps with the ability to lift water from 300’. This system is best suited for use in 2 inch monitoring wells and has a powerful well development capacity. The SS-32 is not compatible for use with Waterra Surge Blocks.  Flow rates are a function of pumping speed and lift requirements and can be as much as 4 gallons per minute.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis Waterra Pump is used for sampling monitoring wells, including sampling for VOC’s and is also an excellent tool for monitoring well development when used with a powered actuator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost importantly, the low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32922868056127,"sku":"WTASS32","price":103.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrass32.jpg?v=1598040440"},{"product_id":"waterra-ss-13-foot-valve-low-flow","title":"Waterra SS-13 Stainless Steel Inertial Pump Foot Valve, Low Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra SS-13 Stainless Steel Foot Valve, Low Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra SS-13 Low Flow Inertial Pump foot valve is made of stainless steel and has a 1\/2 inch OD (13 mm). The SS-13 is used with Waterra Low Flow HDPE or LDPE Tubing (1\/2” X 3\/8”). The tapered male thread self taps into the polyethylene tubing making a semi-secure connection. If this valve is used in a deep monitoring wells (\u0026gt; 50’), a stainless screw may be driven through the poly tubing and into the hole in the valve’s threading to permanently attach the valve to the tubing.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra SS-13  Inertial Pump is typically operated by hand or with the Waterra Lever Pump, a powered Waterra tubing actuator such as the Hydrolift-2 is usually not necessary. This system can be used in 2 inch monitoring wells but is best suited in 1” piezometers and can provide lifts of up to 100 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1\/2 gallon per minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SS-13 Foot Valve is designed for use in narrow diameter wells or 2” monitoring wells where access is restricted. The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32933162188863,"sku":"WTASS13","price":19.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrass13.jpg?v=1598272952"},{"product_id":"waterra-d-25-foot-valve-standard-flow","title":"Waterra D-25 Inertial Pump Foot Valve, Standard Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra D-25 Foot Valve, Standard Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra D-25 Inertial Pump can be operated by hand with the Waterra Lever Pump or with the use of a powered Waterra tubing actuator such as the Hydrolift-2. The Standard Flow Inertial Pump System is the most popular Waterra Inertial Pump. This system is best suited for use in 2 inch monitoring wells and can provide lifts of up to 150 to 200 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1 gallon per minute.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis Waterra Pump is used for sampling monitoring wells, including sampling for VOC’s and is also an excellent tool for monitoring well development when used with Waterra Surge Blocks and a powered actuator.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMost importantly, the low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32933200920639,"sku":"WTAD25","price":7.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrad25_c397688a-d9f3-4c1f-861b-546c285232dd.jpg?v=1598273664"},{"product_id":"waterra-ss-10-stainless-steel-foot-valve-micro-flow","title":"Waterra SS-10 Stainless Steel Inertial Pump Foot Valve, Micro Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra SS-10 Stainless Steel Foot Valve, Micro Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra SS-10 Micro Flow Inertial Pump foot valve is made of stainless steel and has a 3\/8 inch OD (10 mm). The SS-10 is used with Waterra Micro Flow HDPE or LDPE Tubing (3\/8” X 1\/4”). The tapered male thread self taps into the polyethylene tubing making a secure connection.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra SS-10  Inertial Pump is typically operated by hand, the Waterra Lever Pump or a powered Waterra tubing actuator such as the Hydrolift-2 are usually not necessary. This system is suitable for use in 2 inch monitoring wells, 1” piezometers and direct push and drive point piezometers, providing lifts of up to 75 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1\/2 gallon per minute. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SS-10 Foot Valve is designed for use in direct push and drive point piezometers, narrow diameter wells or 2” monitoring wells where access is obstructed or restricted. The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32933220483135,"sku":"WTASS10","price":14.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrass10.jpg?v=1742311950"},{"product_id":"waterra-ss-19-foot-valve-standard-flow","title":"Waterra SS-19 Stainless Steel Inertial Pump Foot Valve, Standard Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra SS-19 Stainless Steel Foot Valve, Standard Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra SS-19 Standard Flow Inertial Pump foot valve is made of 316 Stainless Steel and has a 3\/4 inch (19 mm) OD. The SS-19 is used with Waterra Standard Flow  HDPE or LDPE Tubing (⅝” X ½”). The tapered female thread self taps onto polyethylene tubing making a secure connection.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra SS-19  Inertial Pump can be operated by hand with the Waterra Lever Pump or with the use of a powered Waterra tubing actuator such as the Hydrolift-2. The Standard Flow Inertial Pump System is the most popular Waterra Inertial Pump. This system is best suited for use in 2 inch monitoring wells and can provide lifts of up to 150 to 200 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1 gallon per minute.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SS-19 Inertial Pump is suitable for use in steel casings and open holes and situations that are too abrasive for plastic valves.  The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32933259444287,"sku":"WTASS19","price":43.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrass19.jpg?v=1598274635"},{"product_id":"waterra-ss-16-stainless-steel-foot-valve-standard-flow","title":"Waterra SS-16 Stainless Steel Inertial Pump Foot Valve, Standard Flow","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan\u003eWaterra SS-16 Stainless Steel Foot Valve, Standard Flow\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra SS-16 Standard Flow Inertial Pump foot valve is made or acetal thermoplastic and has a 5\/8 inch OD (16 mm). The SS-16 is used with Waterra Standard Flow  HDPE of LDPE Tubing (⅝” X ½”). The tapered male thread self taps into the polyethylene tubing making a semi-secure connection. If this valve is used in a deep monitoring well (\u0026gt; 50’), a stainless screw may be driven through the poly tubing and into the hole in the valve’s threading to permanently attach the valve to the tubing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra SS-16  Inertial Pump can be operated by hand with the Waterra Lever Pump or with the use of a powered Waterra tubing actuator such as the Hydrolift-2. The Standard Flow Inertial Pump System is the most popular Waterra Inertial Pump. This system is best suited for use in 2 inch monitoring wells and can provide lifts of up to 150 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1 gallon per minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe SS-16 Foot Valve is designed for use in narrow diameter wells or 2” monitoring wells where access is restricted and conditions are too abrasive for using a plastic valve. The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor 2 inch wells we would normally recommend a D-25 Foot Valve.\u003cbr\u003e\u003cbr\u003eThe Standard System with an SS-16 Foot Valve can provide lifts of 150 feet (45 m). Flow rates can be as much as 1 gallon per minute (4.5 lpm).\u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":32933274943551,"sku":"WTASS16","price":32.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/products\/waterrass163.jpg?v=1598275406"},{"product_id":"waterra-d-16-foot-valve-standard-flow","title":"Waterra D-16 Inertial Pump Foot Valve, Standard Flow","description":"\u003ch1\u003eWaterra D-16 Foot Valve, Standard Flow\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra D-16 Standard Flow Inertial Pump foot valve is made of acetal thermoplastic and has a 5\/8 inch OD (16 mm). The D-16 is used with Waterra Standard Flow  HDPE or LDPE Tubing (⅝” X ½”). The tapered male thread self taps into the polyethylene tubing making a semi-secure connection. If this valve is used in a deep monitoring well (\u0026gt; 50’), a stainless screw may be driven through the poly tubing and into the plastic valve’s threading to permanently attach the valve to the tubing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Waterra D-16  Inertial Pump can be operated by hand with the Waterra Lever Pump or with the use of a powered Waterra tubing actuator such as the Hydrolift-2. The Standard Flow Inertial Pump System is the most popular Waterra Inertial Pump. This system is best suited for use in 2 inch monitoring wells and can provide lifts of up to 150 feet. Flow rates are a function of pumping speed and lift requirements and can be as much as 1 gallon per minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe D-16 Foot Valve is designed for use in narrow diameter wells or 2” monitoring wells where access is restricted. The low cost, reliability and durability make the Waterra Inertial Pump an excellent choice as a dedicated monitoring well pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":44450175942841,"sku":"WTAD16","price":10.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/ShopifyImage-2024-09-03T130223.743.png?v=1725382953"},{"product_id":"waterra-sbd-25-surge-block-high-flow","title":"Waterra SBD-25 Surge Block – Standard Flow","description":"\u003ch1\u003eWaterra SBD-25 Surge Block – Standard Flow\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra Inertial Pump is well known for its ability to remove sediment from monitoring wells. This ability is enhanced with the addition of the Waterra Standard Flow Surge Block SBD-25 to the Standard Flow Inertial Pump foot valve D-25. The Surge Block increases the outside diameter of the D-25  valve to marginally less than the ID of the 2” Sch 40  PVC monitoring well. Operating the Inertial Pump with a Surge Block attached creates a plunging motion in the well and sand pack which breaks down bridging and cleans drilling fluids and fines from the sand pack and well screen. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe monitoring well is properly developed by operating the Inertial Pump-Surge Block through the length of the well screen, beginning at the top of the screen and gradually lowering it through the development process. Well development can be a tedious process which usually requires a powered actuator like the Hydrolift-2 or PowerPack is required for this job.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"2 Inch","offer_id":44461160693945,"sku":"WTASBD25","price":12.63,"currency_code":"USD","in_stock":true},{"title":"3 Inch","offer_id":44461160726713,"sku":"WTASBD25W3","price":18.12,"currency_code":"USD","in_stock":true},{"title":"4 Inch","offer_id":44461160759481,"sku":"WTASBD25W4","price":20.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/ShopifyImage-2024-09-03T132309.738.png?v=1725384196"},{"product_id":"waterra-sbd-32-surge-block-high-flow","title":"Waterra SBD-32 Surge Block - High Flow","description":"\u003ch1\u003eWaterra SBD-32 Surge Block - High Flow\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra Inertial Pump is well known for its ability to remove sediment from monitoring wells. This ability is enhanced with the addition of the Waterra High Flow Surge Block SBD-32 to the High Flow Inertial Pump foot valve D-32. The Surge Block increases the outside diameter of the D-32 valve to marginally less than the ID of the 2” Sch 40  PVC monitoring well. Operating the Inertial Pump with a Surge Block attached creates a plunging motion in the well and sand pack which breaks down bridging and cleans drilling fluids and fines from the sand pack and well screen. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe monitoring well is properly developed by operating the Inertial Pump-Surge Block through the length of the well screen, beginning at the top of the screen and gradually lowering it through the development process. Well development can be a tedious process which usually requires a powered actuator like the Hydrolift-2 or PowerPack is required for this job, this being especially true when using the High Flow System.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"2 Inch","offer_id":44461153484985,"sku":"WTASBD32","price":12.63,"currency_code":"USD","in_stock":true},{"title":"3 Inch","offer_id":44461153517753,"sku":"WTASBD32W3","price":18.12,"currency_code":"USD","in_stock":true},{"title":"4 Inch","offer_id":44461153550521,"sku":"WTASBD32W4","price":20.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/ShopifyImage-2024-09-03T133359.099.png?v=1725384846"},{"product_id":"waterra-hydrolift-2-intertial-pump-actuator","title":"Waterra Hydrolift-2 Inertial Pump Actuator","description":"\u003ch1\u003eWaterra Hydrolift-2 Pump - Tubing Actuator\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra Hydrolift-2 Inertial Pump Actuator is a portable, electrically operated tubing actuator designed specifically for use with the Waterra Inertial Pumping System. The Hydrolift-2 is capable of operating the Standard Flow Inertial Pump in any monitoring well up to depths of 150 to 200 feet and the Waterra High Flow Inertial Pumps up to 150 feet. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Hydrolift is a useful tool, especially at sites with multiple monitoring wells. The low cost of dedicated inertial pumps and the simplicity of their operation makes the Hydrolift-2 and Inertial Pumps an interesting option for larger programs.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWeighing just under 40 lbs, the Hydrolift requires a 110 volt source, a 1500 watt generator is typically sufficient. The Hydrolift can be suspended on above ground well completions or it can sit on the ground at flush mount installations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/hydrolift_animation.gif?v=1725453866\" width=\"278\" height=\"441\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003efully adjustable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— the Waterra Hydrolift Pump -Tubing Actuator is fully adjustable and will adapt to almost any size casing or protective well casing and can also be used with flush grade well completions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eanchored discharge end of tubing\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— the Hydrolift supports the Waterra Tubing and also anchors the discharge end of the tubing facilitating sample collection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eavailable in\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eeither 110 volt or 220 volt AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003egreat for use when developing monitoring wells\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ereduces fatigue\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— the use of this automated Waterra Pump System Tubing Actuator will eliminate the fatigue that can be experienced on large monitoring programs.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ehinged tubing clamp\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003esuitable for use with\u003c\/strong\u003e  Low, Standard Flow and High Flow Waterra Pumping Systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eadapts to\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ealmost any size casing or protective well casing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":44450281652409,"sku":"WTAHYDROLIFT2","price":2895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/ShopifyImage-2024-09-04T083758.625.png?v=1725453504"},{"product_id":"waterra-well-slug-2-three-piece-well-slug","title":"Waterra Well Slug-2, Three Piece Well Slug","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003ch1\u003e\u003cspan data-sheets-root=\"1\"\u003eWaterra Well Slug-2, Three Piece Well Slug\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Waterra Well Slug (WWS-2X3) is a fixed volume, cylindrical solid for performing instantaneous, rising or falling head tests in boreholes and calculating hydraulic conductivity. The Waterra Well Slug is designed specifically for 2″ Schedule 40 monitoring wells, however it can also be used in larger diameter monitoring wells. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Well Slug consists of three sections of solid acetal thermoplastic, a material well known for it’s durability and chemical resistance. The sections can be used either individually or together to produce greater volumetric displacement in the well.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eContains No PFAS.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Waterra","offers":[{"title":"Default Title","offer_id":44450298101945,"sku":"WTAWELLSLUG2","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/0771\/files\/ShopifyImage-2024-09-03T141701.307.png?v=1725387430"}],"url":"https:\/\/shop.prmfiltration.com\/collections\/waterra.oembed","provider":"PRM Filtration","version":"1.0","type":"link"}