This IPT engine-driven trash pump has a cast aluminum housing and 3" male NPT suction and discharge ports. The centrifugal pump is self-priming to 26 vertical feet (after initial fill) with its built-in check valve, and its cast iron clog-resistant impeller handles semi-solids up to 2" diameter. The pump housing has Viton (FKM, fluoroelastomer)/silicon carbide mechanical seals and EPDM (ethylene propylene diene monomer) O-rings. The housing's double volute chamber reduces radial load on the impeller, and both the volute and impeller are replaceable. The cast iron discharge port can be rotated in 90 degree increments for ease of pump positioning. Gasoline overhead valve (OHV) engine. A steel roll frame protects the engine and pump and the unit includes a steel suction strainer. A wheel kit (not included) is available for roll frame pumps. This pump is suitable for use in high-volume fluid transfer applications such as in agricultural irrigation and drainage.
|Engine||Briggs & Stratton Vanguard, OHV|
|Pump||Centrifugal self-priming with dual volute|
|Maximum flow rate||Ranges from 370 to 530 gpm|
|Impeller||Cast iron self-cleaning, semi-open|
|Suction port||3" NPT|
|Discharge port||3" NPT, rotates in 90 degree increments|
|Maximum operating temperature||180 degrees F|
|Maximum solids handling||Ranges from 1-1/2" to 2"|
Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.
American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA
DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
We do not guarantee, represent or warrant that your use of our service will be uninterrupted, timely, secure or error-free.
We do not warrant that the results that may be obtained from the use of the service will be accurate or reliable.
You agree that from time to time we may remove the service for indefinite periods of time or cancel the service at any time, without notice to you.
You expressly agree that your use of, or inability to use, the service is at your sole risk. The service and all products and services delivered to you through the service are (except as expressly stated by us) provided 'as is' and 'as available' for your use, without any representation, warranties or conditions of any kind, either express or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title, and non-infringement.
In no case shall Product Recovery Management, Inc. (PRM), our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including, without limitation, lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from your use of any of the service or any products procured using the service, or for any other claim related in any way to your use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service, even if advised of their possibility. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, our liability shall be limited to the maximum extent permitted by law.
SECTION 14 - INDEMNIFICATION
You agree to indemnify, defend and hold harmless Product Recovery Management, Inc. (PRM) and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licensors, service providers, subcontractors, suppliers, interns and employees from any claim or demand, including reasonable attorneys’ fees, made by any third-party due to or arising out of your breach of these Terms of Service or the documents they incorporate by reference, or your violation of any law or the rights of a third-party.